| 7911A5TRSUV1VLP3 NSK Super Precision Bearings | end cap type:Open End Cap; series:500; material:Rubber; compatible housed unit:510, 309, USAF 309,; compatible bore diameter:1-11/16 in; |
| 7011CTRSUV1VLP3 NSK Super Precision Bearings | bearing material:Leaded-Tin Bronze; overall length:5/8 in; material specification:SAE 660 (C932&#; maximum p value:3000 psi; D:5/8 in; d:1/2 in; standards met:ASTM B584-78; maximum pv value:75000; sleeve bearing type:Plain Sleeve; operating temperature range:Maximum of +800; groove/plug type:None; maximum v value:750 fp/min; |
| 7906CTRSULP3 NSK Super Precision Bearings | Dx (min):157 mm; Dynamic Load Rating:28,300 N; Cy (max):3.9 mm; ra (max):1 mm; Weight:0.567 kg; r1:0.5 mm; Radial Clearance:0.036 to 0.066 mm; Bore Type:Cylindrical Bore; D:150 mm; d:120 mm; Static Load Rating:31,500 N; Factor fo:16.0; Fillet Radius/Chamfer:1 mm; Enclosure:Open; Limiting Speed - Grease:4,000 rpm; da (min):125 mm; Groove Diameter:147.6 mm; B:16 mm; Da (max):145 mm; a (max):2.5 mm; |
| 7008A5SN24TRDUDLP3 NSK Super Precision Bearings | D:180mm; SKU:6024-c3-fag; B:28mm; Dynamic Load Rating (kN):83; Limiting Speed Rating (r/min):8000; Seals or Shields:Open Type; Reference Speed Rating (r/min):4750; Clearance:C3; Availability:In Stock; Cage Type:Steel; Fatigue Load Rating (kN):3.55; d:120mm; Static Load Rating (kN):78; Weight:2.18 KGS; |
| 7909CTRDUMP3 NSK Super Precision Bearings | base width:6 in; overall height:7 in; overall length:52 in; series:22200; travel:24 in; D:49-1/4 in; compatible bore diameter:3-3/16 in; compatible bearing series/part number:22200; frame type:One-Piece Saddle Mou; bolt center-to-center width:3 in; |
| 60TAC120BSUC10PN7B NSK Super Precision Bearings | sleeve bearing type:Plain Sleeve; D:13/16 in; harmonization code:848330; series:SS; material specification:CT-1000-K26, SAE841; overall length:1-1/4 in; d:9/16 in; iso grade:9001:2008 &; standards met:RoHS, REACH, DRC Con; bearing material:Sintered Bronze Oil-; |
| 7210A5TRDULP3 NSK Super Precision Bearings | outer ring width:21 mm; series:300-M; fillet radius:1.5 mm; snap ring included:With Snap Ring; precision rating:ABEC 1 (ISO Cla; D:80 mm; finish/coating:Uncoated; bore type:Round; row type & fill slot:Single Row Filling S; standards met:ABMA; static load capacity:6410 lbf; maximum rpm:8500 RPM; cage material:Steel; dynamic load capacity:8830 lbf; internal clearance:C0; closure type:Single Shield; |
| 7011CTRSUMP3 NSK Super Precision Bearings | cage type:Roller Guided; application:Vibratory Applicatio; cage material:Brass; lubrication hole type:Lubrication Groove &; series:232; finish/coating:Uncoated; closure type:Open; dynamic load capacity:445000 N; fillet radius:2 mm; precision rating:Not Rated; bearing material:Steel; static load capacity:520000 N; outer ring type:Not Split; d:90 mm; maximum rpm:4300 RPM; bore type:Straight; B:2.0625 in; |
| 7910CTRDUDMP3 NSK Super Precision Bearings | Static Load Rating (kN):45.5; Cage Type:Plastic; Seals or Shields:Open Type; d:75mm; Oil Limiting Speed (r/min):18500; B:20mm; D:115mm; Dynamic Load Rating (kN):48; Clearance:Standard; Preload:Medium; Availability:In Stock; Grease Limiting Speed (r/min):12200; Weight:0.02 KGS; SKU:7015ctrsump3-nsk; |
| 7908CTRDULP3 NSK Super Precision Bearings | overall depth:59.9 mm; housing construction:Solid Housing; B:174.8 mm; series:212; compatible bore diameter:2-1/4 in, 55 mm; compatible bearing type:Ball Bearing; finish/coating:Uncoated; D:142.9 mm; standards met:UL, AFBMA, AGMA, ASM; flange mounting type:Four-Bolt Square; |
| 7208A5TRSUMP4 NSK Super Precision Bearings | dynamic load capacity:8450 lbf; fillet radius:0.0600 in; d:0.8125 in; inner ring width:0.7813 in; manufacturer upc number:4547359513950; bearing material:Case Carburized Stee; finish/coating:Uncoated; manufacturer product page:Click here; static load capacity:8750 lbf; cone width:0.7813 in; operating temperature range:-40 to 250 ºF; |
| 7210A5TRDUDLP3 NSK Super Precision Bearings | length through bore:1-1/4 in; housing material:Steel; manufacturer catalog number:128097; seal type:Contact with Flinger; mounting type:Two-Bolt Flange; locking device:Set Screw; finish/coating:Uncoated; radial dynamic load capacity:4368 lb; standards met:UL, AFBMA, AGMA, ASM; maximum rpm:6500 RPM; radial static load capacity:2538 lb; bore type:Round; d:1.2500 in; lubrication type:Cannot Be Relubricat; |
| 65BNR10HTV1VSUELP3 NSK Super Precision Bearings | maximum rpm:7500 RPM; series:204; manufacturer catalog number:124175; mounting type:Two-Bolt Flange; duty type:Standard Duty; length through bore:1.34 in; D:3.5300 in; expansion type:Non-Expansion Bearin; lubrication type:Cannot Be Relubricat; radial dynamic load capacity:2899 lb; standards met:UL, AFBMA, AGMA, ASM; locking device:Set Screw; finish/coating:Uncoated; seal type:Contact Seal; radial static load capacity:1482 lb; |
| 7011CTRDULP3 NSK Super Precision Bearings | B:114 mm; Fillet Radius/Chamfer:4 mm; ra1 (max):3 mm; db (min):178 mm; Da (max):322 mm; ra (max):3 mm; Bore Type:Cylindrical Bore; dc (min):211 mm; d:160 mm; db (max):200 mm; D:340 mm; Limiting Speed - Oil:1,900 rpm; Inside Ring Outside Diameter:208 mm; Static Load Rating:1,520,000 N; Dynamic Load Rating:1,070,000 N; Configuration:Single Row; dd (min):228 mm; Limiting Speed - Grease:1,500 rpm; Radial Clearance:0.115 to 0.165 mm; |
| 7010CTRDULP3 NSK Super Precision Bearings | inner ring width:1.5000 in; bearing material:AISI 52100 Steel; radial static load capacity:2540 lbf; series:SER200FS; locking device:Set Screw Collar; D:2.4409 in; seal type:Non-Contact with Sli; bore type:Round; outer ring width:0.8750 in; radial dynamic load capacity:4410 lbf; d:1.0625 in; |
| 7210CTRSULP3 NSK Super Precision Bearings | d:2.0000 in; dynamic load capacity:12000 lbs; cage material:Steel; seal material:Rubber; precision rating:Not Rated; standards met:ABMA, ISO; closure type:Double Sealed; needle bearing type:Machined Bearing wit; maximum rpm:1900 RPM; flanges:No Flange; manufacturer catalog number:5453220000; lubrication hole type:Lubrication Groove &; static load capacity:20700 lbs; bearing material:Chrome Steel; compatible inner ring:MI 25; |
| No. | Brand | D | s | b | d | B | E | F | ra |
| 7009A5TRV1VSULP3 | NSK | 280 mm | - | - | 180 mm | 46 mm | - | - | - |
| 7907CTRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7909CTRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7010CTRDUDLP3 | NSK | 1.0000 in | - | - | - | - | - | - | - |
| 55BNR19STSULP3 | NSK | 76.20 mm | - | - | 30 mm | 41.90 mm | - | - | - |
| 7207A5TRQUMP3 | NSK | 125mm | - | - | 70mm | 40mm | - | - | - |
| 60BER19STV1VSULP3 | NSK | 3.5480 in | - | - | - | - | - | - | - |
| 7211A5TRDUDLP3 | NSK | 47 mm | - | - | 17 mm | 14 mm | - | - | - |
| 7908CTRDULP3 | NSK | 142.9 mm | - | - | - | 174.8 mm | - | - | - |
| 7008CTRDULP3 | NSK | 55 mm | - | - | 30 mm | 13 mm | - | - | - |
| 7908CTRDUDMP3 | NSK | - | - | - | - | - | - | - | - |
| 7008A5TRDUDMP3 | NSK | 1.5000 in | - | - | 0.5000 in | 0.4375 in | - | - | - |
| 7008A5TRSULP3 | NSK | 76.2mm | - | - | 38.1mm | 23.812mm | - | - | - |
| 7209A5TRSULP3 | NSK | 72mm | - | - | 55mm | 9mm | - | - | - |
| 7208CTRSULP3 | NSK | 47 mm | - | - | 40 mm | 18 mm | - | - | - |
| 130BAR10STYNDBLP4A | NSK | - | - | - | - | - | - | - | - |
| 7207CTRSULP3 | NSK | 25 mm | - | - | 22 mm | - | - | - | - |
| 7011CTRDUMP3 | NSK | - | - | - | 100 mm | - | - | - | - |
| 7008A5TRDUDLP3 | NSK | 2.9650 in | - | - | - | - | - | - | - |
| 7011CTRDUDLP3 | NSK | 140 mm | - | - | 65 mm | 48 mm | - | - | - |
| 60BER19STV1VSUELP3 | NSK | - | - | - | 1.1250 in | - | - | - | - |
| 55BER19STV1VSULP3 | NSK | 32 mm | - | - | 15 mm | 9 mm | - | - | 0.3 max |
| 7010A5TRDUDMP3 | NSK | 35mm | - | - | 15mm | 11mm | - | - | - |
| 7209CTRSUMP3 | NSK | 130 mm | - | - | 50 mm | 31 mm | - | - | - |
| 7008CTYNSULP4 | NSK | - | - | - | 2.1875 in | 7.1300 in | - | - | - |
| 7910CTRDULP3 | NSK | 40 mm | - | - | - | - | - | - | - |
| 7007A5TRDULP3 | NSK | 460 mm | - | - | 300 mm | 118 mm | - | - | - |
7207A5TRSUMP3 NSK Super Precision Bearings Video
Super-precision bearings | SKF
With high running accuracy, high-speed performance and high system rigidity, SKF super-precision bearings are ideal for machine tools and other precision
Super Precision Bearings | Emerson Bearing
Super precision bearings are available in several different types, with each offering unique features and
Super Precision Bearings | Products | NSK Global
Try out the new app! NSK has launched a free app primarily for precision bearings for machine tools. Scan 2D barcodes printed on NSK bearing boxes to assess
Precision Bearings | The Timken Company
Miniature and Super Precision. The quality steel, tolerances and features of Timken® miniature bearings meet demanding performance requirements. Our super
Timken Fafnir Super Precision Bearings For Machine Tool
Timken super precision ball bearings meet the highest industry standards in tolerance levels (including ABEC 9). Designed for machine tool applications, our
Super Precision Ball Bearings - NSK Americas
NSK Super Precision Bearings are designed to meet demanding needs of special applications including high accuracy, high rotational speed and high rigidity