| 25572 25520D Timken Tapered Roller Bearings | d:55.000 mm; Grease Speed Rating n1:13000 rpm; Basic Dynamic Radial Load Rating C:88400 N; Basic Static Radial Load Rating Co:61000 N; D:120.0000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:19000 rpm; Fillet Radius ra:2.00 mm; B:29.00 mm; |
| 26118 26284D Timken Tapered Roller Bearings | d2:45 mm; D:100 mm; d2 (max):65 mm; F:59 mm; b:7 mm; E:86.5 mm; B:25 mm; s:1.4 mm; Dynamic (Ca):70.8 kN; r1s (min):1.5 mm; Static (Coa):61.9 kN; rs (min):1.5 mm; Pu:7.550 kN; b1:12.5 mm; |
| NA759 752D Timken Tapered Roller Bearings | with tapered bore:750 min-1; D:580 mm; Dynamic (Cr):12 mm; Pu:3300 kN; with cylindrical bore:600 min-1; Grease:4940 kN; rs (min):6 mm; Oil:388.930 kN; d:280 mm; Static (Cor):22.3 mm; B:175 mm; |
| T177XA SPCL(1) Timken Tapered Roller Bearings | Radius:1.5 mm; Static Load Rating:131.9 kN; Dynamic Load Rating:73.1 kN; d:150 mm; Da:188 mm; B:25 mm; da:168 mm; D:210 mm; Oil Holes:2.5 mm; |
| 15126 15251D Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating:4380 lbf; Dimension A1:1.2813 in; Distance J:4.5938 in; Dimension DA:3.0000 in; Dimension A2:0.5313 in; Weight W:1.95 lb; Diameter N:0.5000 in; Dimension L:3.1250 in; Basic Static Radial Load Rating Co:2520 lbf; Height H:5.5625 in; Insert Bearing IB:ZMaRC; Shaft Diameter D:1 1/4 in; Height T:1.6563 in; |
| 464 452D Timken Tapered Roller Bearings | d:30.000 mm; B:46.00 mm; Oil Speed Rating n2:8000 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:6200 rpm; Basic Static Radial Load Rating Co:68000 N; Fillet Radius ra:1.50 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:88400 N; |
| HM252343NA HM252311D Timken Tapered Roller Bearings | Grease Speed Rating n1:3200 rpm; B:61.90 mm; d:65.000 mm; Basic Dynamic Radial Load Rating C:154000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4300 rpm; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; Basic Static Radial Load Rating Co:163000 N; |
| NA94700 94117D Timken Tapered Roller Bearings | Fillet Radius ra:2.00 mm; d:65.000 mm; B:33.00 mm; Fillet Radius rb:1.00 mm; D:140.0000 mm; Basic Static Radial Load Rating Co:86500 N; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating n1:4600 rpm; Oil Speed Rating n2:6000 rpm; |
| NA539 533D Timken Tapered Roller Bearings | Basic Static Radial Load Rating Co:73500 N; D:160.0000 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Oil Speed Rating n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Grease Speed Rating n1:3800 rpm; Accessories:Two Shields & Snap-R; B:30.00 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; |
| 358A 353D Timken Tapered Roller Bearings | D:57.2000 mm; Shielded or Sealed B1:12.7 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Basic Dynamic Radial Load Rating C:14000 N; Width Plain B:9.5 mm; Basic Static Radial Load Rating Co:9300 N; Fillet Radius ra:0.79 mm; d:31.800 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Sealed Speed Rating n3:7500 rpm; Accessories:One Shield; |
| 15112 15251D Timken Tapered Roller Bearings | Sealed Speed Rating n3:4300 rpm; B:33.30 mm; Fillet Radius ra:1.50 mm; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:57200 N; Grease Speed Rating n1:4300 rpm; D:100.0000 mm; d:55.000 mm; Basic Static Radial Load Rating Co:47500 N; Oil Speed Rating n2:5600 rpm; |
| T402 T402W Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:76100 N; Grease Speed Rating Open/Shielded n1:6000 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:45000 N; Oil Speed Rating Open/Shielded n2:7000 rpm; d:45.000 mm; B:29.00 mm; Sealed Speed Rating n3:4000 rpm; D:120.0000 mm; Accessories:Snap-Ring; |
| NA569 563D Timken Tapered Roller Bearings | B:73.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:195000 N; Accessories:Shield & Seal; Grease Speed Rating n1:2200 rpm; Sealed Speed Rating n3:2200 rpm; Oil Speed Rating n2:3200 rpm; Basic Static Radial Load Rating Co:176000 N; Fillet Radius ra:2.50 mm; d:85.000 mm; |
| 386A 384D Timken Tapered Roller Bearings | D:110.0000 mm; Accessories:One Shield; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:63700 N; Oil Speed Rating Open/Shielded n2:8000 rpm; B:27.00 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Basic Static Radial Load Rating Co:36500 N; Sealed Speed Rating n3:4400 rpm; d:40.000 mm; |
| 13890 13835D Timken Tapered Roller Bearings | rs (min):3 mm; Dynamic (Ca):341 kN; Static (Coa):362 kN; d2:105 mm; B:49 mm; r1s (min):3 mm; b:13 mm; Pu:37.990 kN; D:225 mm; E:195 mm; F:135 mm; b1:22.5 mm; s:4.5 mm; d2 (max):148.8 mm; |
| T102R A Timken Tapered Roller Bearings | Grease Speed Rating Open/Shielded n1:5700 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; D:90.0000 mm; d:50.000 mm; Basic Dynamic Radial Load Rating C:39100 N; B:20.00 mm; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:34500 N; |
| No. | Brand | D | C | T | a | E | F | d | B |
| NA97450 97901D | Timken | 130 mm | - | - | - | 110.8 mm | 71 mm | - | 31 mm |
| T1760 SPCL(1) | Timken | 225.0000 mm | - | - | - | - | - | 150.000 mm | 35.00 mm |
| T178 C | Timken | 47.0000 mm | - | - | - | - | - | 17.000 mm | 14.00 mm |
| 15100S 15251D | Timken | 42.0000 mm | - | - | - | - | - | 15.000 mm | 19.1 mm |
| NA05076SW 05185D | Timken | 265.0000 mm | - | - | - | - | - | 170.000 mm | 42.00 mm |
| 359S 353D | Timken | 85.0000 mm | - | - | - | - | - | 45.000 mm | 11.00 mm |
| 53177 53376D | Timken | 125 mm | - | - | - | 110.5 mm | 85 mm | - | 24 mm |
| 357 353D | Timken | 35.0000 mm | - | - | - | - | - | 10.000 mm | 11.00 mm |
| NA482 472D | Timken | 28.0000 mm | - | - | - | - | - | 12.000 mm | 8.00 mm |
| T350 D | Timken | 26.0000 mm | - | - | - | - | - | 10.000 mm | 8.00 mm |
| NA539 533D | Timken | 160.0000 mm | - | - | - | - | - | 90.000 mm | 30.00 mm |
| NA87700 87112D | Timken | 47 mm | - | - | - | - | - | 20 mm | 14 mm |
| 17119 17245D | Timken | 170.0000 mm | - | - | - | - | - | 80.000 mm | 68.26 mm |
| 3490 3423D | Timken | 145.0000 mm | - | - | - | - | - | 105.000 mm | 20.00 mm |
| NA05075 05185D | Timken | 52.0000 mm | - | - | - | - | - | 25.000 mm | 20.60 mm |
| 2585 2523D | Timken | 52.0000 mm | - | - | - | - | - | 20.000 mm | 15.00 mm |
| NA385 384CD | Timken | 140.0000 mm | - | - | - | - | - | 65.000 mm | 33.00 mm |
| NA44163 44363D | Timken | 62.0000 mm | - | - | - | - | - | 30.000 mm | 23.80 mm |
| 3779 3729D | Timken | 52.0000 mm | - | - | - | - | - | 20.000 mm | 30.00 mm |
| NA26118 26284D | Timken | 240.0000 mm | - | - | - | - | - | 160.000 mm | 38.00 mm |
| 33885 33821D | Timken | 190.0000 mm | - | - | - | - | - | 105.000 mm | 36.00 mm |
| HM231149NA HM231116D | Timken | 62.0000 mm | - | - | - | - | - | 30.000 mm | 16.00 mm |
| NA691A 672D | Timken | 36 mm | - | - | - | - | - | 20 mm | 8 mm |
| 5066 05185D | Timken | 90.0000 mm | - | - | - | - | - | 50.000 mm | 20.00 mm |
T302 T302W Timken Tapered Roller Bearings Video
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and