| AMI UEFPL209-28W Mounted Units & Inserts | expansion type:Expansion Bearing &#; |
| AMI UCMST204-12MZ2 Mounted Units & Inserts | Associated spanner:TMFN 40-52; Mass lock nut:5.62 kg; B:34.392 mm; d3 max.:290.652 mm; d2:264.744 mm; overall nut width:1-11/32 in; Hexagonal head bolt:5/16-18x5/8; lock washer or locking device part number:PL48; Threads per inch:6; b:21.844 mm; |
| AMI UC314-43 Mounted Units & Inserts | travel:14.2500 in; series:NLTU; manufacturer upc number:087796062481; overall height:2.5000 in; compatible bore diameter:2.2500 in, 2.4375 in; overall length:23.7500 in; base width:10.4375 in; frame material:Welded Steel; frame type:Side Mount; |
| AMI UCPA205-16NPMZ20RF Mounted Units & Inserts | D:28mm; SKU:7001ctrdump3-nsk; B:8mm; Seals or Shields:Open Type; Preload:Medium; Grease Limiting Speed (r/min):57500; d:12mm; Cage Type:Plastic; Oil Limiting Speed (r/min):87500; Weight:0.02 KGS; |
| AMI UCT211-35C4HR5 Mounted Units & Inserts | lubrication type:Non-Lubricated; race material:Brass; housing material:Carbon Steel; d:0.6250 in; ball material:Case Hardened Carbon; rod end type:Male Threaded; thread direction:Left Hand; grade:Commercial; |
| AMI MUCFT206NPRF Mounted Units & Inserts | d:95mm; Cage Type:Plastic; Seals or Shields:Open Type; Grease Limiting Speed (r/min):7500; Oil Limiting Speed (r/min):12000; Dynamic Load Rating (kN):133; Static Load Rating (kN):114; Fatigue Load Rating (kN):4.25; Preload:Light; Weight:2.70 KGS; |
| AMI UC318-55 Mounted Units & Inserts | manufacturer product page:Click here; D:2.3622 in; set screw thread size:3/8-24 UNF; material:Steel; bearing bore diameter:1.5000 in; B:0.7200 in; |
| AMI UCT210-30C4HR5 Mounted Units & Inserts | unit type:Side Mount; slot spacing:1.7656 in; d:1.0000 in; seal type:Dual Lip with Slinge; slot width:0.2500 in; lubrication type:Lubrication Fitting; housing material:PBT Thermoplastic; dynamic load capacity:3150 lbf; series:UCWTPL200MZ20RFCEW; overall height:3-31/64 in; |
| AMI UCMP210-31MZ2RF Mounted Units & Inserts | Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:B04144; |
| AMI UKFCSX15+H2315 Mounted Units & Inserts | Housing:SSAFS 517; Cap bolt recommended tightening torque:298.3 N·m; ba:35.719 mm; P150°:26.7 kN; Cap bolt, SAE grade:8; Cap bolt:2 x 5/8-11 UNC; Stabilizing ring:SR-17-14; L:330.2 mm; P180°:32 kN; H1:95.25 mm; |